Suunto is committed to achieving Level AA conformance for this website in conformance with the Web Content Accessibility Guidelines (WCAG) 2.0 and achieving compliance with other accessibility standards. Please contact Customer Service at USA +1 855 258 0900 (toll free), if you have any issues accessing information on this website.

Suunto Traverse Uporabniški priročnik - 2.1

Poti

Pot lahko ustvarite v storitvi Movescount ali uvozite pot, ustvarjeno v drugi storitvi.

Kako dodati pot:

  1. Obiščite storitev www.movescount.com in se prijavite.
  2. Uro Suunto Traverse sinhronizirajte s storitvijo Movescount z uporabo Suuntolink in priloženega kabla USB.

V storitvi Movescount je poti mogoče tudi izbrisati.

Navigating a route

You can navigate a route you have transferred to your Suunto Traverse from Movescount (see 3.20 Routes) or from a log in your logbook with GPS data. You get a preview of the route based on the route list or logbook selection.

If you are using the compass for the first time, you need to calibrate it (see Calibrating compass). After activating the compass, the watch will begin searching for a GPS signal. After the watch acquires a GPS signal, you can begin to navigate a route.

To navigate a route:

  1. Press START to enter the start menu.
  2. Scroll to NAVIGATION with START and press NEXT.
  3. Scroll to Routes or NAVIGATION and press NEXT to enter .
  4. Scroll to the route you want to navigate with START or LIGHT and press NEXT.
  5. Press NEXT to select Navigate. All navigating is recorded. If you watch has more than one sport mode, you are prompted to select one.
  6. Select Forwards or Backwards to chose the direction you want to navigate (from the first waypoint or the last).

route select direction

  1. Start navigating. The watch informs you when you are approaching the beginning of the route.

route begin

  1. The watch informs you when you have arrived at your destination.
TIP:

You can also start navigating while recording an activity (see Recording activities).

Med navigacijo

Med navigacijo pritisnite tipko VIEW, da se premaknete na naslednje prikaze:

  • prikaz cele proge, ki prikazuje celo pot
  • povečan prikaz poti: povečan prikaz privzeto uporablja merilo 100 m (0,1 milje) oziroma večje merilo, če ste daleč od poti

Prikaz proge

Pogled cele proge prikazuje naslednje informacije:

  • (1) puščica, ki označuje vašo lokacijo in kaže v smer, kamor ste namenjeni;
  • (2) prva in zadnja točka na poti;
  • (3) najbližja zanimiva točka je prikazana kot ikona;
  • (4) merilo, uporabljeno za prikaz proge.

route track view

OPOMBA:

V prikazu cele proge je sever vedno zgoraj.

Orientacija zemljevida

Orientacijo zemljevida lahko spremenite v meniju z možnostmi NAVIGATION (NAVIGACIJA) » Settings (Nastavitve) » Map (Zemljevid) » Orientation (Orientacija).

  • Heading up (Smer gibanja zgoraj): Prikazuje povečani zemljevid tako, da se gibate v smeri navzgor.
  • North up (Sever zgoraj): Prikazuje povečani zemljevid tako, da je sever zgoraj.

Pogled profila vzpona

Pogled profila vzpona prikazuje naslednje informacije:

  1. preostali vzpon;
  2. diagram profila nadmorske višine v realnem času;
  3. preostali spust.

ascent profile Traverse

Če se preveč odmaknete od začrtane poti, se grafikon profila ne posodablja. Namesto tega se pod grafikonom prikaže napis Off route (S poti). Za natančen izračun vzpona se vrnite na začrtano pot.

Table of Content