Suunto is committed to achieving Level AA conformance for this website in conformance with the Web Content Accessibility Guidelines (WCAG) 2.0 and achieving compliance with other accessibility standards. Please contact Customer Service at USA +1 855 258 0900 (toll free), if you have any issues accessing information on this website.

FREE SHIPPING OVER $350 | EASY RETURNS | GIFT OF THE WEEK | SIGN UP FOR NEWSLETTER

Suunto Tank POD User Guide

Pairing and unpairing

Pairing Suunto Tank POD

For Suunto EON Core, EON Steel, and EON Steel Black

To pair your Suunto Tank POD:

  1. After installing Suunto Tank POD and opening the valve, wait for the green LED on the POD to flash.
  2. If your dive computer has a blank screen, press any button to activate it.
  3. Use proximity pairing: Hold your dive computer close to the Suunto Tank POD. Make sure you follow the instructions in Tank POD alignment.
  4. After a few seconds, a menu pops up on the screen showing the Suunto Tank POD serial number, battery status, and the tank pressure. Select the correct gas from the list to pair with your device and press middle button to confirm pairing.

    Gas-menu-tankPOD Eon

NOTE:

The battery level indication shown when pairing the Suunto Tank POD is an approximation only.

  1. Repeat the procedure above for additional Suunto Tank POD devices and select different gases for each POD.

    pod assigned

Alternatively, you can pair your Suunto Tank POD from the menu:

  1. In the Gases menu, select the gas you want your Suunto Tank POD to pair with.

    eon menu pairing select gas

  2. Press middle button to open the gas settings and select Tank POD.

    eon menu pairing select gas settings tank pod

  3. From the list of Tank PODs, select the one which matches the serial number of your Suunto Tank POD.

    eon menu pairing select tank pod

  4. Make sure the Suunto Tank POD has been activated by ensuring the tank pressure reading shows on screen and POD green led is blinking.

    pod assigned

In the dive main views, only one tank pressure is shown and corresponds to the active gas. When you change gas, the displayed tank pressure changes accordingly.

WARNING:

If there are several divers using Tank PODs, always check before you dive that the POD number of your selected gas corresponds to the serial number on your POD.

tank pod serial number new

TIP:

Remove pressure from the Tank Pod when not diving to save battery life.

For Suunto D5

To pair your Suunto Tank POD:

  1. After installing Suunto Tank POD and opening the valve, wait for the green LED on the POD to flash.
  2. If your dive computer has a blank screen, press any button to activate it.

  3. Use proximity pairing: Hold your dive computer close to the Suunto Tank POD. Make sure you follow the instructions in Tank POD alignment.

  4. After a few seconds, a menu pops up on the screen showing the Suunto Tank POD serial number, battery status, and the tank pressure. Select the correct gas from the list to pair with your device and press middle button to confirm pairing.

    D5 prox pairing pod selected

    NOTE:

    Battery level information is displayed only if the battery is low. The indication shown when pairing the Suunto Tank POD is an approximation only.

  1. Repeat the procedure above for additional Suunto Tank POD devices and select different gases for each POD.

    D5 prox pairing pod assigned

Alternatively, you can pair your Suunto Tank POD from the menu:

  1. In the Gases menu, select the gas you want your Suunto Tank POD to pair with.

    D5 menu pairing not assigned

  2. Press middle button to open the gas settings and select Tank POD.

    D5 menu pairing gas selected pod not assigned

  3. From the list of Tank PODs, select the one which matches the serial number of your Suunto Tank POD.

    D5 menu pairing pod number shown

  4. Make sure the Suunto Tank POD has been activated by ensuring the tank pressure reading shows on screen and POD green led is blinking.

    D5 menu pairing pod assigned

In the dive main views, only one tank pressure is shown and corresponds to the active gas. When you change gas, the displayed tank pressure changes accordingly.

WARNING:

If there are several divers using Tank PODs, always check before you dive that the POD number of your selected gas corresponds to the serial number on your POD.

tank pod serial number new

TIP:

Remove pressure from the Tank Pod when not diving to save battery life.

Table of Content