Suunto is committed to achieving Level AA conformance for this website in conformance with the Web Content Accessibility Guidelines (WCAG) 2.0 and achieving compliance with other accessibility standards. Please contact Customer Service at USA +1 855 258 0900 (toll free), if you have any issues accessing information on this website.

Suunto Sale: Up to 40% Off Now ! >

How do I change settings for EON Steel and EON Core in DM5?

To adjust the settings of EON Steel / EON Core follow the steps below or watch this video:

1. Connect your dive computer to the PC using the supplied USB cable.
2. Open DM5 and select EON Steel / EON Core in the Devices window.
3. Select the tab General settings. You can adjust the following settings:
  a. Language
  b. Time & date format
  c. Units
  d. Tones
  e. Brightness
  f. Compass declination

4. After changing the settings, synchronize them with your dive computer before disconnecting the USB cable.
To synchronize:
  a. Make sure the USB cable is securely connected. The cable must not be unplugged until the synchronization is completed.
  b. Click Synchronize.

  c. The synchronization may take several minutes. DM5 will notify you once the synchronization is completed.