Suunto is committed to achieving Level AA conformance for this website in conformance with the Web Content Accessibility Guidelines (WCAG) 2.0 and achieving compliance with other accessibility standards. Please contact Customer Service at USA +1 855 258 0900 (toll free), if you have any issues accessing information on this website.


Suunto EON Core User Guide - 2.0

How to install and pair a Suunto Tank POD

To install and pair a Suunto Tank POD:

  1. Install the Tank POD as described in the Tank POD quick guide or in the Tank POD user guide.
  2. After installing the Tank POD and opening the valve, wait for green LED on Tank POD to flash.
  3. If your Suunto EON Core has a blank screen, press any key to activate it.
  4. Use proximity pairing: Hold your Suunto EON Core close to the Tank POD. Make sure you follow the instructions in Tank POD alignment section of the Tank POD user guide.
  5. After a few seconds, a menu pops up on the screen showing the Tank POD serial number, battery status and the tank pressure. From the menu, select the correct gas for that Tank POD.

    POD confirm pairing Eon


The battery level indication shown when pairing the Tank POD is an approximation only.

  1. Repeat the procedure above for additional Tank PODs and select different gases for each POD.

Alternatively you can pair the Suunto Tank POD(s) from the menu:

  1. Select which Tank POD to use with each gas by selecting a Tank POD for the gas in question in the Gases menu.

    Pod pair Eon

  2. Make sure the Tank POD has been activated by ensuring there is tank pressure reading on screen and Tank POD green led is blinking. In the menu, the Tank POD is identified by the serial number printed on the Tank POD.

In the dive main views, only one tank pressure is shown and corresponds to the active gas. When the gas is changed, the displayed tank pressure is also changed accordingly.


If there are several divers using Tank PODs, always check before you dive that the POD number of your selected gas corresponds to the serial number on your POD.

1 typeA B expand


Remove pressure from the Tank POD when not diving to save battery life.

To unpair and remove your Tank POD from a specific gas using proximity:

  1. Hold your Tank POD close to your dive computer in Tank pressure view:


  2. Scroll to the gas you want to remove your Tank POD from:

    Gas-menu-tankPOD Eon

  3. Select Unpair:

    Tankpod unpair Eon

  4. Your Tank POD is removed from the selected gas list:

    TankPOD-removed Eon

Table of Content