Suunto is committed to achieving Level AA conformance for this website in conformance with the Web Content Accessibility Guidelines (WCAG) 2.0 and achieving compliance with other accessibility standards. Please contact Customer Service at USA +1 855 258 0900 (toll free), if you have any issues accessing information on this website.

Suunto EON Steel User Guide - 2.5

  • Display - modes, views, and states

Display - modes, views, and states

Your Suunto EON Steel has three buttons that have different functions in different views. Short pressing or long pressing them gets you to different functionalities.

Button logic Steel

By default Suunto EON Steel has four main dive modes: Air / Nitrox, Trimix, CCR and Gauge.

Press and hold the middle button to enter Main menu and select the appropriate mode for your dive under Dive settings » Mode.

Suunto EON Steel automatically restarts to change mode.

Suunto EON Steel has two main views: time/no deco and compass. Change the main view by pressing the middle button.

More views are available through customization in DM5. See How to customize dive modes with DM5.

For more detailed information on the views availabe in the different modes, see Dive modes.

Suunto EON Steel automatically switches between surface and dive state. If you are more than 1.2 m (4 ft) below the water level and the water contact is on, the dive state is activated.

When tank pressure screen is in use, you see the following information:

TankPressView

  • Present depth is 19.0 m
  • Active gas is Nitrox 32%
  • Dive time is 22 minutes
  • Tank pressure left is 120 bar
  • No decompression time is 50 minutes
  • Safety stop is ahead at 3.0 meters
  • 21 hours of diving time left before need to recharge
  • Temperature is 20°C

The switch window in the bottom right corner has diferrent information that can be changed by short pressing the lower button.

Table of Content